On this page, we have managed to share the official USB driver for Kelaida Mate 10 Pro Device. If in case you were already searching for the USB driver of this device, then this page will help you out.
There are 3 USB drivers available for your device. Two of them can be used to flash the stock firmware on your Mediatek Device and Last is for normal connecting the device to the computer.
Kelaida Mate 10 Pro CDC driver For Flashing Firmware
Kelaida Mate 10 Pro VCOM driver For Flashing Firmware
Kelaida Mate 10 Pro ADB driver For Normal Connecting
How to install driver manually
Step 1: Download and extract the driver on your computer.
Step 2: Open Device Manager and Click on Add the Legacy Hardware Menu.
Step 3: Click Next.
Step 4: Select Install the hardware that I manually Select from a list.
Step 5: Locate the extracted driver manually on your computer.
Step 6: Click Add.
Step 7: Your Driver will be installed and listed in the Device Manager.
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] If you are trying to flash stock firmware on your device then download CDC and VCOM Driver Only. ADB Driver will not work for flashing the stock firmware.
[*] Kelaida Mate 10 Pro Stock Firmware: You can download Kelaida Mate 10 Pro Stock Firmware from here.