Rage 40GN

On this page, we have managed to share the official USB driver for Rage 40GN Device. If in case you were already searching for the USB driver of this device, then this page will help you out.

There are 3 USB drivers available for your device. Two of them can be used to flash the stock firmware on your Mediatek Device and Last is for normal connecting the device to the computer.

Rage 40GN CDC driver For Flashing Firmware

Driver Name: CDC Driver
Driver Size: 120 KB
How to Install: Watch Tutorial
Driver Link: Click Here to Start Download

Rage 40GN VCOM driver For Flashing Firmware

Driver Name: VCOM Driver
Driver Size: 401 KB
How to Install: Watch Tutorial
Driver Link: Click Here to Start Download


Rage 40GN ADB driver For Normal Connecting

Driver Name: ADB Driver
Driver Size: 8.28 MB
How to Install: Watch Tutorial
Driver Link: Click Here to Start Download

How to install driver manually

Step 1: Download and extract the driver on your computer.

Step 2: Open Device Manager and Click on Add the Legacy Hardware Menu.

Step 3: Click Next.

Step 4: Select Install the hardware that I manually Select from a list.

Step 5: Locate the extracted driver manually on your computer.

Step 6: Click Add.

Step 7: Your Driver will be installed and listed in the Device Manager.

Important Notes:

[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.

[*] If you are trying to flash stock firmware on your device then download CDC and VCOM Driver Only. ADB Driver will not work for flashing the stock firmware.

[*] Rage 40GN Stock Firmware: You can download Rage 40GN Stock Firmware from here.

Load Comments
Made with ♥ in Spain | Powered by BlueHost

Copyright © 2015-2020 GSM USB Driver. All Rights Reserved.