Wiko Pulp 4G

On this page, we have managed to share the official usb driver for Wiko Pulp 4G Smartphone. If in case you were already searching for the usb driver for this device, then this page will help you out.

There are 3 usb driver available for your device. Two is for Flashing the Stock Firmware and last is for normal connecting the device to the computer.

Wiko Pulp 4G CDC driver For Flashing Firmware

Download CDC Driver

How to Install (video)

Wiko Pulp 4G VCOM driver For Flashing Firmware

Download VCOM Driver

How to Install (video)

Wiko Pulp 4G driver For Normal Connecting

Download Wiko Driver

How to Install (video)

How to install driver manually:

Step 1: Download and extract the driver on your computer.

Step 2: Open Device Manager and Click on Add the Legacy Hardware Menu.

Step 3: Click Next.

Step 4: Select Install the hardware that I manually Select from a list.

Step 5: Locate the extracted driver manually on your computer.

Step 6: Click Add.

Step 7: Your Driver will be installed and listed in the Device Manager.

Important Notes:

[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.

[*] If you are trying to flash stock firmware on your device then download CDC and VCOM Driver Only. Wiko Driver will not work for flashing the stock firmware.

[*] Wiko Pulp 4G Stock Firmware: You can download Wiko Pulp 4G Stock Firmware from here.

Made with ♥ in Spain | Powered by BlueHost

Copyright © 2015-2017 GSM USB Driver. All Rights Reserved.